Is there any procedure for melting copper cathode samples using graphite crucible in a muffle furnace??

Hello again baji1985,

Could you give us a little more information please.

- Is this a laboratory size electric muffle furnace? Please confirm or describe what you have.

- Are you using glassy (vitreous) carbon crucibles?

Hopefully that will get you an answer sooner.

Thank you.
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
519 641- 3212

Hello Mr. Vettecoupe,

I want to melt copper cathode samples in order to know about the impurities present in it. Is there any proper analytical procedure for this???

We are having Muffle furnace for this purpose. And am not clear about crucible which is more optimum for this process.

Somebody recommended that an induction furnace should be used for this process.

So I am little bit confused. Kindly provide necessary instrument details.

We planned to start this analytical testing recently. Hence we are in need to procure necessary consumables. Previously we wanted to use Graphite crucible, but there are some practical constraints in getting graphite crucibles in UAE. Hence we want an alternative procedure for this process.

Could you please provide us the optimum procedure to melt copper cathode samples given by standardized bodies such as ASTM, BS, or any other?

Regards,
baji.S.

Hello again baji1985,

This may be by far the best place for you to get first class answers to all your questions.

The COPPER DEVELOPMENT ASSOCIATION INC.
260 Madison Avenue, New York, NY 10016
Phone: 212-251-7200
Fax: 212-251-7234
www.copper.org/
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Their Mission Statement:
Copper Development Association, Inc. (CDA) is a U.S-based, not-for-profit association of the global copper industry, influencing the use of copper and copper alloys through research, development and education, as well as technical and end-user support. CDA is committed to promoting the proper use of copper materials in sustainable, efficient applications for business, industry and the home.

Please let us know what you found out so that all may benefit from your updated knowledge. Thank you.

Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
519 641- 3212

Hi baji,
Refer the ANNEXES A1.4.2.1.d on ASTM B115 , you will get the details ,

Thanks,
Siva

Siva,

It didn't mentioned about the direct facts,such as crucibles etc.they are implying about sampling whenever there's dispute raising between supplier & manufacturer.Moreover it tolds about melting through ingots.


Regards,
Baji.S.