How to resolve AdBlock issue? 
- Posts: 3
- Thank you received: 0
× If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.
Wire submerged in crude oil
- Martin M Iraizoz
- Topic Author
- Offline
- Fresh Boarder
-
Less More
9 years 11 months ago #2770 by Martin M Iraizoz
Wire submerged in crude oil was created by Martin M Iraizoz
Good morning everyone.
I would like to know if anyone has experience with wires submerged into crude oil.
Insulation compound is critical, for crude oil is quite aggressive with it. The use of the wires is for heating the crude oil in the tubing (Joule effect). The wire should not have any protective metal sheating, then it could damage the plastic tubing.
Does anyone know any supplier that can satisfy the above mentioned requirements?.
Thanks in advance,
Regards.
I would like to know if anyone has experience with wires submerged into crude oil.
Insulation compound is critical, for crude oil is quite aggressive with it. The use of the wires is for heating the crude oil in the tubing (Joule effect). The wire should not have any protective metal sheating, then it could damage the plastic tubing.
Does anyone know any supplier that can satisfy the above mentioned requirements?.
Thanks in advance,
Regards.
Please Log in to join the conversation.
- Peter J Stewart-Hay
- Offline
- Moderator
-
Less More
- Posts: 126
- Thank you received: 21
9 years 11 months ago - 9 years 11 months ago #2774 by Peter J Stewart-Hay
Regards,
Peter J. Stewart-Hay Principal
Stewart-Hay Associates
www.Stewart-Hay.com
This email address is being protected from spambots. You need JavaScript enabled to view it.
Replied by Peter J Stewart-Hay on topic Re: Wire submerged in crude oil
Hello Martin,
Just in case you do not receive a specific reply to your query, we recommend that you contact all your polymer suppliers to see if they have a compound that might fit your needs. Their chemistry people will likely ask for a sample of the crude oil you are referencing.
Just in case you do not receive a specific reply to your query, we recommend that you contact all your polymer suppliers to see if they have a compound that might fit your needs. Their chemistry people will likely ask for a sample of the crude oil you are referencing.
Regards,
Peter J. Stewart-Hay Principal
Stewart-Hay Associates
www.Stewart-Hay.com
This email address is being protected from spambots. You need JavaScript enabled to view it.
Last edit: 9 years 11 months ago by Peter J Stewart-Hay.
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.066 seconds