Wirenet Image Band
wirenet.org mobile image band

WAI Forums

Joomla

× If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.

Wire length

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 2 months ago #561 by Archived Forum Admin
Wire length was created by Archived Forum Admin
Can any one let me know the general formula for calculating the length of the wire in a spool in meters /kms. I need to calculate the wire length of a Co2 welding wire which is wound in 12.5 Kg spools with 0.8 mm ,1.00 mm and 1.2 mm . I will be grateful if somebody gives me a correct direction

best regards
Manjunath

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 2 months ago #562 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Wire length
Hello,

We have taken the easy way out and thus refer you to the Quabbin Wire & Cable Co., Inc. web page titled " A Method to Calculate the Capacity of a Reel or Spool".

www.quabbin.com/page750.html

Although in Imperial units, it will be very easy for you to convert this equation over to Metric units.

Always check the reality with your calculation.

If you are looking for an excellent, free units conversion program, we recommend Josh Madison's "Convert" at

joshmadison.com/software/convert/

Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 2 months ago #563 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Wire length
Would a real easy way be to weight the spool without wire and then subtract that tare weight from the total wire plus spool weight. This would give you the net wire weight. Then take a wire chart and even if you don't have one for copper clad steel wire you could use a steel wire chart and generally they list the weight by either pounds per 1000 feet (or Kg/kms.) or feet per pound (Kms/Kg)

With this data you can divide the net weight by either Kg/kms to get total Kms.

You can get fairly close as the difference in weight between copper clad and non-copper clad is not that significant but if you were concerned you can calculate the cross section of copper and cross section of steel. Coppper weights about 1/3rd of copper so it is not that difficult to determine the weight per unit of length.

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 2 months ago #564 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Wire length
dear sir,
Many thanks for the reply

Please Log in to join the conversation.

Moderators: Erik A MacsPeter J Stewart-Hay
Time to create page: 0.070 seconds

Gallery

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06443-2662

P: (203) 453-2777