CDA #110 is 99.9% pure electrolytic tough pitch copper and the annealing temperature range is 600 to 1400 F. Keep in mind however that annealing is a time-temperature relationship. The degree of anneal is determined with a laboratory tension tester.
"Some bumps on the surface" is really not enough information to give us a clue as to what is going on. For instance we don't understand if this is over a whole spool of wire or perhaps just at one spot such as the end of the spool. We therefore suggest you read the following thread www.wirenet.org/forum/viewmessages.cfm?Forum=12&Topic=82
Looking at your company's website, we also suggest you discuss this further with a staff metallurgist or metallurgical engineer.
Regards, Peter J. Stewart-Hay Principal Stewart-Hay Associates www.Stewart-Hay.com 519 641- 3212
The administrator has disabled public write access.