Search - Content
Search - People/Events
Search - Industry
Search - Forums
Search - Newsfeeds



jobcenterbanner

FacebookLinkedinPinterestYoutube
Welcome, Guest
Username: Password: Remember me
Have a question on lubricants, wire drawing, quality, testing, ISO, environmental? Post your question here to get the answer!

TOPIC: Coating tank

Coating tank 1 year 11 months ago #2059

Good day All..

Need some help in locating a product..

We use a coating tank that is heated to 120 degrees and within the tank there are different size balls floating on surface to conserve the evaporation of the liquid. What i would like to know where I can find a supplier for these balls, I don't even have a clue as to what these are called.

Thank you
The administrator has disabled public write access.

Re: Coating tank 1 year 11 months ago #2060

Hello there,

First I guess from your location that you are talking 120F. Is the liquid hot water. We used to use ping pong balls on warm water like this.

Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
The administrator has disabled public write access.

Re: Coating tank 1 year 11 months ago #2061

Good morning Vettecoupe..

yes it is hot water and the ball are the shape of ping pong balls but somewhat thicker, is normal ping pong balls ok to use with this temperature.
Thank you for your reply
The administrator has disabled public write access.

Re: Coating tank 1 year 11 months ago #2062

Hello again,

Here are some web sites for more robust industrial-type hollow balls for your application. Hopefully you will find something here.

www.eccllc.us/applications_advantages.php

www.pfonline.com/dp/showpf/show_index.cfm?code=USPLAS&lcode=PL

www.enquip.com/BirdBalls.html

plasticballs.com/

Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
The administrator has disabled public write access.

Re: Coating tank 1 year 11 months ago #2063

There may be multiple suppliers of the p.p. balls but the following web site has them.

rb


www.techneusa.com/generalLab/plasticballs.htm
The administrator has disabled public write access.

Re: Coating tank 1 year 11 months ago #2064

They are just Polypropylene balls. they come in different sizes. Like you say they are used to reduce eveaporation. Biggest problems is choosing the size that works best for you.

People with electroplating tanks often use them. Size becomes important when you are dipping parts or pieces into the tank and there are ways and places that the ball(s) can get into the part. If you are not dipping parts but just have an open tank, then any size should work. Might want them to be big enough or put a screen over the suction inlet because if you should suck air you don't want your pump to ingest a ball.

You can also put lids on the tank.
The administrator has disabled public write access.
Time to create page: 0.169 seconds