Wirenet Image Band
wirenet.org mobile image band

Wire Journal News

11/4/21 – This iconic WAI program will be offered on Wednesday, Dec. 1 and Dec. 8. Registration for the event is $145 for WAI members, $175 for the new member special offer and $245 for non-members. For a full description of the presenters, and any updates, go to funwiremfg.heysummit.com.

Madison, Connecticut, USA – May 10, 2021 – WAI completed its second virtual presentation of the Association’s Fundamentals of Wire Manufacturing (Fundamentals) course, with the courses presented over seven consecutive Wednesdays from March 17 to April 28 drawing a collective 165 attendees.

“The continued strong participation shows the industry need for sound, basic information,” said WAI Executive Director Steve Fetteroll, who observed that the virtual format has also proven to be a good fit for the industry. “While in-person programs presented at Wire Expo or Interwire are ideal, staging them on-line has allowed more companies to allow their employees to participate for a very affordable cost. We will continue to offer Fundamentals at our trade shows, including Interwire 2021, but the virtual version has evolved from an emergency replacement to a full-fledged program that we are proud to offer.”

The presentations included: mechanics of wiredrawing, Matt Reinoehl, SDI LaFarga COPPERWORKS; drawing dies, Tom Maxwell, Jr., Die Quip; wiredrawing lubricant properties, David Gzesh, Blachford Corporation; wire breaks and surface damage, Dr. Horace Pops, Horace Pops Consulting; fundamentals of ferrous metallurgy, Anand Bhagwat, Minova USA Inc.; stranding and cabling, Kevin Dancy, Roteq Machinery Inc.; extrusion, Erik Macs, Wire & Plastic Machinery Corp.; cleaning and coating of rod and wire, Zach McAfee and Chris Porada, Chemetall North America; ferrous testing and properties, Richard Gordon, C. Richard Gordon Consulting LLC; fundamentals of electrical testing, Casey Spradlin and Erika Akins, Southwire Company, LLC; marking and printing, Mark Spencer, W. Gillies Technologies LLC; ferrous heat treatment, Richard Gordon; manufacturing problem solving, Stacy Martin, Prysmian Group; and an Operations Panel, Jan Sørige, Enkotec; Tom Heberling, Southwire; and Jim York, Insteel Industries, Inc.

The first virtual Fundamentals program, which replaced the program that could not be held when Wire Expo was canceled due to Covid-19, was held over seven consecutive Wednesdays from Sept. 16 to Oct. 28, 2020. The program, which saw two sessions each week that were each 70 minutes long (up from 45 minutes), drew a total of 199 attendees from 28 countries. The format received very positive reviews.

Virtual formatting quickly became a WAI focus due to Covid-19. WAI presented Streamcast on July 15, 2020.The online presentation of 12 industry speakers saw more than 250 individual attendees take part, setting a record for any WAI online event. On Nov. 11, 2020, WAI held a trifecta virtual event that included the Association’s annual clockwinding ceremony, its annual meeting and the 2020 Mordica Lecture by Dr. Gil Baker. A separate three-part webinar series by Dr. Horace Pops in January/February saw all 500 available slots filled before the first one was held.

Madison, Connecticut, USA – May 5, 2021 – WAI completed its second virtual presentation of the Association’s Fundamentals of Wire Manufacturing (Fundamentals) course, with the courses presented over seven consecutive Wednesdays from March 17 to April 28 drawing a collective 165 attendees.

“The continued strong participation shows the industry need for sound, basic information,” said WAI Executive Director Steve Fetteroll, who observed that the virtual format has also proven to be a good fit for the industry. “While in-person programs presented at Wire Expo or Interwire are ideal, staging them on-line has allowed more companies to allow their employees to participate for a very affordable cost. We will continue to offer Fundamentals at our trade shows, including Interwire 2021, but the virtual version has evolved from an emergency replacement to a full-fledged program that we are proud to offer.”

The presentations included: mechanics of wiredrawing, Matt Reinoehl, SDI LaFarga COPPERWORKS; drawing dies, Tom Maxwell, Jr., Die Quip; wiredrawing lubricant properties, David Gzesh, Blachford Corporation; wire breaks and surface damage, Dr. Horace Pops, Horace Pops Consulting; fundamentals of ferrous metallurgy, Anand Bhagwat, Minova USA Inc.; stranding and cabling, Kevin Dancy, Roteq Machinery Inc.; extrusion, Erik Macs, Wire & Plastic Machinery Corp.; cleaning and coating of rod and wire, Zach McAfee and Chris Porada, Chemetall North America; ferrous testing and properties, Richard Gordon, C. Richard Gordon Consulting LLC; fundamentals of electrical testing, Casey Spradlin and Erika Akins, Southwire Company, LLC; marking and printing, Mark Spencer, W. Gillies Technologies LLC; ferrous heat treatment, Richard Gordon; manufacturing problem solving, Stacy Martin, Prysmian Group; and an Operations Panel, Jan Sørige, Enkotec; Tom Heberling, Southwire; and Jim York, Insteel Industries, Inc.

The first virtual Fundamentals program, which replaced the program that could not be held when Wire Expo was canceled due to Covid-19, was held over seven consecutive Wednesdays from Sept. 16 to Oct. 28, 2020. The program, which saw two sessions each week that were each 70 minutes long (up from 45 minutes), drew a total of 199 attendees from 28 countries. The format received very positive reviews.

Virtual formatting quickly became a WAI focus due to Covid-19. WAI presented Streamcast on July 15, 2020.The online presentation of 12 industry speakers saw more than 250 individual attendees take part, setting a record for any WAI online event. On Nov. 11, 2020, WAI held a trifecta virtual event that included the Association’s annual clockwinding ceremony, its annual meeting and the 2020 Mordica Lecture by Dr. Gil Baker. A separate three-part webinar series by Dr. Horace Pops in January/February saw all 500 available slots filled before the first one was held.

 

The Wire Association International will stage its first-ever standalone regional edition of its long-running and content-refined Fundamentals of Wire Manufacturing course on October 10, 2018, at the Sheraton McKinney Hotel in McKinney, Texas, USA.

This concentrated introductory workshop provides a solid grounding in the essentials of wire and cable manufacturing presented by experts in the field. It is WAI’s most successful training program and refresher course for new hires, sales teams and operations personnel. The curriculum includes: mechanics of wiredrawing, drawing dies, wiredrawing lubricants, wire breaks & surface damage, stranding cable, cleaning & coating of rod & wire, extrusion, basics of electrical testing, ferrous heat treatment, used machinery, manufacturing problem solving, testing & properties and ferrous metallurgy.

“The program has become so popular in recent years that we wanted to expand it by offering it regionally too, outside of the confines of WAI’s annual show and conference,” said WAI Director of Education Marc Murray. “We know there’s a strong demand for this type of instruction, not just for new employees but for veterans brushing up on their knowledge who want to learn something new. We want to make it as easy and convenient as possible for people to get this kind of education. Moving it physically closer to the audience is an effective way to do that.”

This one-day program provides extensive instruction by 10 industry professionals and networking opportunities pertinent to the ever-evolving wire industry.

The registration fee is $195 for WAI members and $295 for nonmembers. Registration includes classroom materials and lunch. On October 11, 2018, WAI offers participants a choice of one or both plant tours to Encore Wire and Wire & Plastic Machinery Corp. at $25 each.

Click here to see the program schedule and here to register. 

.

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06443-2662

P: (203) 453-2777