Wirenet Image Band
wirenet.org mobile image band

Wire Journal News

As most of the world continues to adjust to Covid-19, three WAI chapters fully intend to continue their scholarships programs, all of which largely depend on their annual golf tournaments for funding.

It was not easy in 2020: WAI’s New England Chapter was able to reschedule and stage its tourney at a later date, with a smaller field; the Midwest Chapter canceled its golf tourney; and the Southeast Chapter canceled its event. However, that did not stop the cause. The New England Chapter awarded five scholarships, the Midwest Chapter awarded three and the Southeast Chapter awarded four.

Looking forward in 2021, it is not a certainty that all of the three chapters will be able to hold their events. The New England Chapter and the Southeast Chapter have scheduled dates, but the Midwest Chapter has not made a final decision. Despite the challenges, the chapters want to continue their scholarships. The goal is far from abstract as the dozen of 2020 scholarship recipients can attest.

“We’re very proud of how the chapters have continued to support their scholarship programs,” said WAI Executive Director Steve Fetteroll. “That chapter members are so willing to support the programs says a lot about who they are.”

The cable and wire industry is intrinsic in modern life - wire and cable products are used in everything from construction to automotive manufacturing to telecom markets. To that end, given the way the global markets dropped sharply in 2020 due to the pandemic, it's no surprise that wire products were in low demand. But now that a vaccine is increasing the probability of getting the virus under control, how will that affect the industry in 2021?

2020 Is Over: Now What Was the Impact of COVID-19 on the Wire Products Market?
The global demand for wire and cable products dropped by at least 2 to 5% in the United States, Europe, and China in response to the COVID-19 pandemic. This was largely attributed to the temporary shut down of manufacturing plants, construction sites, and other revisions that require wire and cable products. The Chinese market, in particular, saw the sharpest downfall throughout 2020, with a record low of 35.7 PMI last February.

However, the predictions made in early 2020 were much more drastic than reality and the current industry growth is projected to be more robust than ever before. In fact, forecasts suggest that the demand for the industry will be on track again in 2021.

Future Market Projections
At the moment, the global cable and wire industry is projected to grow by 4% over the next five years, with the industry capping at least $1 billion US dollars by 2027. Much of this growth is being attributed to the new demand for green energy, including green automotive designs that will replace combustion engines by 2035 in the United States. The current growth and new demand for the industry suggest that the impact of COVID-19 was nothing more than a hiccup in the long run.

While there is no denying that the pandemic negatively impacted the wire industry in 2020, it's also true that the industry is bouncing back stronger and more in-demand than before.

Market forecasts are reliable tools that can predict shortfalls in interest and demand with relative certainty. For industries that are experiencing increasing global demand, such as the electrical wire and cable market, a forecast can give industry leaders insight into how businesses should operate to keep up with demand - particularly in terms of the wires and cables that need to be manufactured.

What Will the Electrical Wire and Cable Market Look Like in Five Years?
The wire and cable market has seen steady growth over the last five years, even with the 2020 pandemic creating a demand shortfall. But with the new quarter of 2021, it's clear that the industry is bouncing back strongly and is quickly catching up to the projections that were made previously. In fact, some forecasts indicate that demand for the industry is going to increase even more with new legislation and policy, especially in America

Big Industry Growth in America
The most recent global forecasts suggest a 4% growth in all wire and cable industry segments worldwide by 2027. In America, however, there is a much more impressive growth projection being seen. Current forecasts indicate that the American industry will grow by 8% CAGR by 2026, meaning the American market will be outperforming the global average by a significant rate.

New automotive policy legislation, which is phasing out combustion vehicles by 2035, and commitments to producing green energy and creating accessible high-speed internet are all reasons why the American market is projected to boom so dramatically.

The current trends in global cable and wire industry growth are promising, particularly in light of new engineering and construction advancements that are being pursued by global governments. There is every possibility that current market projections will increase with new industry trends.

If you're not an expert in metallurgy or ferrous metals, you're not alone. Many Americans know very little about this critically important industry. It may not be the most thrilling subject, but ferrous metal is everywhere you look: anything carbon steel, stainless steel, or cast iron fits the bill. Ferrous wire, in particular, is vital for maintaining the flow of society. It's used for fences, in airports, on highways, in construction, and in the electric industry, to name a few.

Ferrous Metal vs. Non-Ferrous Metal
Simply put, ferrous metals are magnetic and consist primarily of iron. Non-ferrous metals aren't magnetic and don't contain any iron. The high levels of carbon in ferrous metals make them susceptible to rust when exposed to moisture. The only metals that can withstand oxidation are chromium-stainless alloys and wrought iron, which is so pure it resists rust. The magnetic properties of ferrous metals make them ideal for the wire and cable industry.

Wire and Cable
Ferrous wire is just the technical term for carbon steel wire, stainless steel wire, and alloy steel wire (think welding wire or even tension bridges). Wire is incredibly versatile; it can be easily bent or coated with other materials for enhanced durability.

Principles of Metallurgy
Metallurgy is defined as the study of metal's behavior, structure, and properties. The actual process of metallurgy refers to the methods used for extracting metals in their purest form. Essentially, it refers to creating alloys and the purification of metals. These principles include:

  • Roasting (heating) in the presence of oxygen
  • Pulverization into powder via grinding/crushing
  • A hydrolytic process that utilizes water and the settling of denser ore particles
  • Separation using magnetic wheels and a rotating belt
  • Separation via oil, leaving the ore as surface froth


Metals composed primarily of iron are relatively inexpensive to produce, and they're incredibly versatile—they can be fabricated to fit an array of applications. Ferrous wire is also critical to maintaining everyday life's comforts: even steel nails are manufactured with wire made using metallurgy techniques!

U.K.-based Primetals Technologies announced that it has signed a contract to supply three high-speed wire rod mills to a Chinese customer seeking to expand its capacity.

Per a press release, the deal for the single-strand, high-speed wire rod mills will include three Morgan Vee Mini-Blocks as mini-finishing mills (MFM). They will have three sets of Morgan Intelligent Pinch Rolls and high-speed laying heads, hydraulic systems and oil lube systems. Two mills will have a two-stand 230 MFM and the third will have a two-stand 250 MFM. Primetals Technologies will also supply air/oil systems for a snap shear and rollerized turndown.

Each of the three mills will have an annual production capacity of 720,000 metric tons and a maximum operating speed of 115 mps, a maximum rolling rate of 150 metric tons per hour. The mills will produce rod ranging from 5.5 to 20 mm and 20 to 28 mm in diameter, rebar of 6 to 16 mm in diameter, and coil with an inner diameter of 850 mm and an outer diameter of 1,250 mm.

“The new mills improved thermo-mechanical rolling capabilities will complement additional mills moving into the company’s main production base,” the release said. Start-up is scheduled to be completed this year. The customer, which was not named, was described as one of the largest raw material sup-pliers for fasteners in northern China. It also produces welding wire and carbon structural grades.

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06443-2662

P: (203) 453-2777