Wirenet Image Band
wirenet.org mobile image band

Wire Journal News

The United States Department of Energy (DoE) has selected a dozen projects across 11 states for $34 million in funding offered for the development of cable undergrounding solutions as part of efforts to improve the resilience of the country’s electricity system.

A press release said that the U.S. electric power distribution system—which has more than 5.5 million line-miles and some 180 million power poles—is too susceptible to damage by weather and its effects. DoE will fund projects that can further the deployment of “undergrounding” power lines.

One of the selected company projects chosen for funding is GE Vernova Advanced Research. Its project is to develop a “robotic worm tunneling construction tool that would dig and install conduit and cables for underground distribution powerlines in a single step. “GE’s system would mimic the natural movement of earthworms and tree roots to install 1,000 feet of cable and conduit in two hours with unmatched flexibility. The tool could deploy from a standard pickup truck and would eliminate the cost, complexity, and surface disruption compared with conventional approaches.”

In Idaho, Melni Technologies was selected for its work on “medium-voltage power cable splice kits that could be installed in 10-15 minutes, which is three-four times faster than conventional kits and would reduce failures and mistakes up to 90 percent by eliminating installation steps and potential human errors.”

In Kentucky, Prysmian Cables and Systems USA is seeking to come up with “a hands-free power cable splicing machine operating in underground vaults to reduce the share of splicing-caused medium-voltage network failures from 60-80 percent to less than 5 percent and dramatically improve the workforce safety by reducing the time the underground cable splicing crews spend in underground vaults.”

Last modified on February 4, 2024

Italy’s Prysmian Group has successfully commissioned the inter-array cable system for the Fécamp offshore wind farm, located in the English Channel, some 24 km off the French coast, in Normandy (Seine Maritime department).

A press release said that the Fécamp offshore wind farm is comprised of 71 wind turbines, has a total design capacity of nearly 500 MW. Prysmian secured the project in 2020 with a contract awarded by EDF Renewables and its partners.

“This important project marks a further significant milestone for the Group, being one of the first large-scale offshore wind farms located in France, in which the Group has full EPCI responsibility for the inter-array supply and installation contract,” said Alberto Boffelli, COO of Projects BU, Prysmian Group. A one-stop-shop service provider, Prysmian was responsible for the design, manufacture, installation, burial, termination and testing of a total of 118 km of 33 kV submarine cables with 630 mm2 cross-sections and both aluminum and copper cores to connect the 71 wind turbines that each has capacity of 7 MW to the offshore substation.

This contract confirms the trust and confidence that EDF Renewables and its partners place in Prysmian, having already awarded the Group other projects such as those for the St. Nazaire and Calvados offshore wind farms.

Last modified on February 4, 2024

Buffalo Wire Works Co. Inc. (Buffalo Wire), announced that it has acquired Bison Steel, a company based in Depew, New York, that lays claim to having an unmatched industry product.

A press release said that the acquisition of Bison Steel deepens the portfolio of Buffalo Wire, which was founded in 1869, and supplies screening media for many industries, including aggregate, mining, industrial, recycling, asphalt, slag, green waste, topsoil and architectural. “Buffalo Wire Works is excited to launch this product as part of our ever-growing product suite.” 

At its website, Bison Steel notes that no other company can match its high-abrasion-resistant welded wire screens used in the aggregate and mining industries. Its welded high-carbon steel screens, created by a unique proprietary process, are very hard and abrasive resistant. They can last three times longer than traditional woven screens, reduce maintenance and increase production by up to 15%. Wire hardness can be up to 500 Brinell.

Last modified on February 4, 2024

Hellenic Cables, the cables segment of Cenergy Holdings, announced that the South Fork Wind project has successfully powered up New York’s first offshore wind turbine, a major milestone in the construction of the first U.S. utility-scale offshore wind farm in federal waters.

A press release said that Hellenic Cables designed, manufactured, supplied, tested and terminated 30 km of 66 kV XLPE-insulated subsea inter-array cables and associated accessories. The cables were manufactured at Hellenic Cable’s plant in Corinth, Greece.

“This accomplishment reflects the dedication and expertise of everyone involved in this pioneering project,” said Alexis Alexiou, CEO of Cenergy Holdings. “We’re proud to work with industry leaders such as Ørsted and Eversource on a project that will help transform the US energy sector.”

Hellenic Cables already has a strong project pipeline in the U.S. offshore wind sector, with contracts for the supply of inter-array cables for flagship projects, including Revolution Wind in Connecticut and Rhode Island, Southcoast Wind in Massachusetts, and Dominion’s Coastal Virginia Offshore Wind.

Last modified on February 4, 2024

A terrestrial cable has successfully traversed a pre-laid channel beneath the seabed on two islands in ocean waters north of the city of Zhoushan (part of East China’s Zhejiang Province), marking the completion of the first project of its kind in China.

Per multiple media reports, including China Daily, the terrestrial cable provided by the Hengton Group links the islands of Zhoushan and Shangyuanshan. The State Grid Zhoushan Power Supply Company, the project’s developer, said that inter-island energy transmission in China is usually done with submarine cables. However, China’s coastal waters have dense waterways and busy ships whose anchors could easily damage submarine cables, which led to using of a 10 kV one-km-long terrestrial cable that is buried deeper.

Li Zhen, the head of the design company of the project, said that other advantages include lower costs to make the cable as well as easier construction. To reduce tension and friction of the cable during the line laying, the company used wire rope traction, essentially installing an “exoskeleton” for the cable. It then used pipeline lubrication materials to reduce friction, ensuring that the cable remained intact during the dragging process.

Zhen said that this method could be “extensively applied to connect islands separated by short and medium distances of no more than 2 km.” The long-term goal, he added, is to achieve connections between islands over medium and long distances.

Last modified on February 4, 2024

Gerdau reported the recent completion of commissioning of the company’s new steel processing heat-treatment facility in Modlothian, Texas.

A press release said that the facility—adjacent to Gerdau’s Midlothian, Texas electric arc furnace (EAF) steel mill—is the only one in North America that can produce stretched and stress relieved A722 bars. That capability provides improved stress relaxation properties for fasteners as well as post-tensioned and pre-stressed applications. Unique to the facility is the ability to produce lengths up to 65 feet long in both quench and tempered, as well as stretched and stress relieved products. The new facility was designed to meet the evolving demands of various industries, including the rapidly expanding renewable energy sector.

Last modified on February 4, 2024

Rosendahl Nextrom recently equipped its in-house technology center with two brand-new laboratory lines for LAN cable and fiber optical cable production.

A press release said that Rosendahl Nextrom’s technology center, located at its headquarters in Austria, has been exclusively dedicated to datacom. Two new laboratory lines, one for loose tube production and another for Cat. 8 wire insulation, have been installed and are now available for test runs and trials:

The loose tube line, equipped with numerous features that enhance quality and productivity while reducing scrap, was designed to make a significant advancement in fiber optical cable manufacturing. Noteworthy for its compact design, the line achieves speeds of up to 1,200 m/min. Visitors can experience firsthand the improved performance of an enhanced fiber cutter, optimized jelly-filling, a cable drying system for high speeds, and more.

The second line is a high-speed insulation line designed for Cat. 8 LAN cables. It has a robust extruder group of four with high-precision gas dosing. Notable highlights include the cooling section and the automatic take-up station, engineered to handle speeds of up to 2,500 m/min.

“We are excited to advance our research and development with these new laboratory lines and extend our infrastructure to our customers and partners,” said Johann Jäkel, Business Unit Director. “The trials on the lab equipment will help improve product quality and increase operational efficiency. It’s a win-win situation for everyone involved and further strengthens the strategic partnership with our customers.”

V

Last modified on February 4, 2024

Morgan-Koch Corporation announced that it has been chosen by GMP-Slovakia to represent it in North America.

A press release said that Morgan-Koch Corporation will represent GMP Slovakia’s product lines, which include steel reels and cable drums, take-apart reels and handling equipment. Founded in 2003, GMP Slovakia develops and manufactures steel reels, collapsible reels and reel handling equipment for the wire and cable industry. The company has two manufacturing plants and has long worked closely with key machinery manufacturers.

GMP Slovakia’s steel reels are suitable for drawing, bunching and stranding steel, copper or aluminum wires and its metal cable drums are used for cable and rope process or transportation. The size and dimensions of each steel reel can be customized according to customer needs. Its range of products also includes baskets, pallets and customized solutions all designed with 3D graphic system, as well as reparation service of used steel cable reels.

 “We welcome GMP Slovakia into our group of high-quality suppliers to the wire and cable industry,” said Albert Kozlowski, vice president/general manager of Morgan-Koch.

Last modified on February 4, 2024

Ducab Group, one of the UAE’s largest industrial manufacturing businesses & solution providers, has been awarded to supply overhead conductors for a 288 KM OHL (Over Head Line) project as part of a GE Renewable Energy’s Grid Solutions business electrification project in Iraq.

A press release said that the project complements Iraq’s larger energy transition plan, moving the nation into a regional energy hub through smart and sustainable grid infrastructure. The Ducab Group participated in the GE Renewable Energy’s Grid Solutions business tender for the design, supply, installation, testing, and commissioning of 400 kV overhead transmission lines interconnecting Jordan and Qaim area in Iraq. This is being done in connection with a re-enforcement program for EPC, and the supply of substations and transmission lines (132 kV/400 kV) turnkey projects.

“Our products and services have a direct impact on communities, industries and nations,” said Ducab Group CRO Mohammad A. Almutawa. “By supplying energy solutions to the Iraq power project, we can help ensure a reliable power supply to Iraq and aim to support the country in achieving its socio-economic objectives.”

The release noted the challenges matching electricity supply with demand. In 2019, for example, analysts estimated that peak demand was 26 GW, 58% higher than generation capacity. GE Renewable Energy’s Grid Solutions business signed a contract with the Ministry of Electricity in Iraq to support these shortcomings, bringing in Ducab as a key supplier on the project.

 “The association with Ducab for this strategic project is further promoting Ducab’s products and the strength of the ‘Make it in the Emirates’ brand,” the release said.

Last modified on February 4, 2024

Hellenic Cables, the cables segment of Cenergy Holdings that is based in Greece, has signed a contract to supply some 205 km of inter-array cables for the Bałtyk II and Bałtyk III offshore wind farms in Poland.

A press release said that the joint venture of Equinor and Polenergia has been developing the MWF Bałtyk II & III offshore wind farm projects in Poland. Hellenic Cables was appointed by Seaway7 as the key subcontractor for the design, manufacturing, testing and supply of up to approximately 205 km of 66 kV submarine inter-array cables and related accessories for these projects.

The Bałtyk II and III wind farms extend into 122 sq km and 117 sq km areas, respectively, strategically positioned in the southwestern Baltic Sea within Polish waters at depths from 20 to 45 m. Hellenic Cables will manufacture the submarine cables at its Corinth plant, with the schedule calling for delivery completed by the first half of 2026.

“We are delighted to be working with Hellenic Cables once again, following our successful collaboration on previous offshore wind projects,” said Seaway7 Project Manager Tom Rijnders.

Hellenic Cables notes that, through its fully owned subsidiary, Fulgor, the company’s Corinth plant can produce some of the world’s longest submarine cable lengths without factory joints.

Last modified on February 4, 2024

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06443-2662

P: (203) 453-2777