Wirenet Image Band
wirenet.org mobile image band

Wire Journal News

Madison, Connecticut, USA – May 10, 2021 – WAI completed its second virtual presentation of the Association’s Fundamentals of Wire Manufacturing (Fundamentals) course, with the courses presented over seven consecutive Wednesdays from March 17 to April 28 drawing a collective 165 attendees.

“The continued strong participation shows the industry need for sound, basic information,” said WAI Executive Director Steve Fetteroll, who observed that the virtual format has also proven to be a good fit for the industry. “While in-person programs presented at Wire Expo or Interwire are ideal, staging them on-line has allowed more companies to allow their employees to participate for a very affordable cost. We will continue to offer Fundamentals at our trade shows, including Interwire 2021, but the virtual version has evolved from an emergency replacement to a full-fledged program that we are proud to offer.”

The presentations included: mechanics of wiredrawing, Matt Reinoehl, SDI LaFarga COPPERWORKS; drawing dies, Tom Maxwell, Jr., Die Quip; wiredrawing lubricant properties, David Gzesh, Blachford Corporation; wire breaks and surface damage, Dr. Horace Pops, Horace Pops Consulting; fundamentals of ferrous metallurgy, Anand Bhagwat, Minova USA Inc.; stranding and cabling, Kevin Dancy, Roteq Machinery Inc.; extrusion, Erik Macs, Wire & Plastic Machinery Corp.; cleaning and coating of rod and wire, Zach McAfee and Chris Porada, Chemetall North America; ferrous testing and properties, Richard Gordon, C. Richard Gordon Consulting LLC; fundamentals of electrical testing, Casey Spradlin and Erika Akins, Southwire Company, LLC; marking and printing, Mark Spencer, W. Gillies Technologies LLC; ferrous heat treatment, Richard Gordon; manufacturing problem solving, Stacy Martin, Prysmian Group; and an Operations Panel, Jan Sørige, Enkotec; Tom Heberling, Southwire; and Jim York, Insteel Industries, Inc.

The first virtual Fundamentals program, which replaced the program that could not be held when Wire Expo was canceled due to Covid-19, was held over seven consecutive Wednesdays from Sept. 16 to Oct. 28, 2020. The program, which saw two sessions each week that were each 70 minutes long (up from 45 minutes), drew a total of 199 attendees from 28 countries. The format received very positive reviews.

Virtual formatting quickly became a WAI focus due to Covid-19. WAI presented Streamcast on July 15, 2020.The online presentation of 12 industry speakers saw more than 250 individual attendees take part, setting a record for any WAI online event. On Nov. 11, 2020, WAI held a trifecta virtual event that included the Association’s annual clockwinding ceremony, its annual meeting and the 2020 Mordica Lecture by Dr. Gil Baker. A separate three-part webinar series by Dr. Horace Pops in January/February saw all 500 available slots filled before the first one was held.

Madison, Connecticut, USA – May 10, 2021 – Interwire 2021: registration is open
It is with great pleasure that WAI announces that registration—at www.interwire21.com—is now officially open for Interwire 2021, which returns to the Georgia World Congress Center at the rescheduled dates of Oct. 26-27.

At press time, the good news has been that aside from the event itself, the backdrop should be better and better as the percentage of vaccinated people continues to rise over the next five months. Yet WAI is taking every measure to make sure that the return to Atlanta is both safe and worthwhile.

WAI has been working diligently with its long-time show contractor, Shepard Exposition Services, and the staff of the Georgia World Congress Center, to ensure that a comprehensive operating plan will be in place for Interwire. Only recently have meetings and exhibitions restarted, so WAI and its Atlanta partners will be consistently monitoring best practices, and will adjust plans accordingly. More details will be provided in future issues, but they all will be based on what will best ensure the health and safety of all participants and contractors.

In normal times, WJI would not be going into details on an event that is still far off, but it is worth noting again that much effort is being put into a showcase for the potential of Industry 4.0, which includes elements such as automation, AI, robotics, data analytics, and machine learning. Ready or not, change has arrived, and representatives at the Industry 4.0 Pavilion will be there to inform and inspire Interwire attendees.

May 10 2021. Cerrowire® has named David Hawker as plant manager for its facility in Hartselle, Alabama. He has 34 years of management experience in the electrical products manufacturing sector, with leadership roles in the U.S. and Canada. He most recently was vice president and general manager of Nexans Energy Division (North America). His understanding of market drivers, technology capabilities and cost/financial implications in his previous role drove him to focus on factors that resulted in world-leading profit. A Canadian native, he holds a degree in applied science, with a specialty in mechanical engineering, from the University of Waterloo in Waterloo, Ontario. He also served as the 2017 president of the Wire Association International. Based in Hartselle, Alabama, with plants also in Georgia, Indiana, and Utah, Cerrowire manufactures copper wire for commercial, industrial and residential sectors.

RichardsApex, Inc., reported two promotions. Howard Luckey has been promoted to plant manager of its Philadelphia operation. He started with the company in 1984 and worked his way up through various positions. He most recently was shipping manager, where he ensured the efficient movement of materials throughout the manufacturing facility. Of note, he has been promoted to the same position that his brother, Robert “Bob” Luckey, had held before retiring several years ago. Several other Luckey family members have been and continue to be employed at RichardsApex, and Howard continues the family’s legacy of hard-working, dedicated employees. The company also promoted Janelle Gerardi to senior chemist within its R&D team. She was cited for critical contributions to development of next generation products. She joined the company in 2018. She previously worked for Johnson Matthey in the company’s precious metals division. She holds a B.S. degree in chemistry from Villanova University. Based in Philadelphia, Pennsylvania, RichardsApex, Inc., supplies lubricants, cleaners and coatings for the wire drawing and metal working industries.

David Ohmann is the new president of Wytech Industries. Prior to joining the company, he held sales and marketing leadership positions at Heraeus and MicroGroup (a TE Connectivity Company). He was cited for his extensive medical device background, engineering perspective and deep understanding of the complexities of the development of specialty wire. He holds an M.S. degree from the University of Wisconsin-Madison and an MBA from the University of Minnesota, Carlson School of Management. Based in Rahway, New Jersey, Wytech designs and manufactures complex components for medical devices that includes precision wire components and specialty core wires.

5/10/2021:  The next staging of wire Southeast Asia—and its sister show, Tube Southeast Asia—will now be held Feb. 9-11, 2022 at the Bangkok International Trade & Exhibition Centre (BITEC) in Bangkok, Thailand.

A press release from organizers Messe Düsseldorf said that the event, which was to be held Sept. 22-24, is being moved to the new dates to “allow for optimum international participation.” It noted that in the past, over 90% of the exhibitors came from overseas countries such as Austria, France, Germany, Great Britain, India, Japan and Korea.

“It is anticipated that by next year with further easing of travel restrictions and ongoing successful vaccine deployments worldwide, there will be a more optimistic environment for companies to do business safely and effectively at these trade fairs,” the release said.
The two trade fairs were first held in 1997. At the last staging in 2019, international exhibitors from 29 countries participated at the trade fairs, while 45 % of trade visitors came from outside Thailand.

5/10/2021: Summer is approaching, and for many people that means that it is will be peak time to fire up the grill. There have been many stories about the danger of cleaning your grill with a wire brush, as sharp particles and splinters can break off of stainless steel- and brass-wire brushes. If that happens, those particles can become imbedded in future cooking, and result in significant risks if ingested.

However, wire brushes are efficient at cleaning a grill, and can be safely used, but they do require some common sense. There are two ways to approach this, and either can be right if you do it properly.

When the cooking is complete, wait for the grill surface to cool down to where it is still warm but not cool. Then, using a good quality wire brush, sweep off any food particles. Doing this when the grill is still warm makes it easier to scrap away food particles that, once cooled, are baked on, potentially containing wire slivers. Conversely, if you don’t want to bother cleaning at that point, you can wait till next use. At that point, though, you should pre-heat the grill at a high temperature for an extended period (at least 20 minutes). Then, place a wire brush into a bucket of warm, soapy water, and scrub off the surface of the grates.

Whether you reach for a wire brush before or after cooking, give it a close look. See if it has any broken bristles, or if it is worn or warped. If anything looks iffy, discard it.

As an alternative to wire brushes, Consumer Reports recommends cleaning with a coil brush, pumice stone or abrasive pads. Good Housekeeping suggests crumpled aluminum foil and a strong degreaser. And, for those who like a natural approach, consider the following: pre-heat the grill as described above, then slice an onion in half. Pierce the onion with a fork, and run the cut-side down along the grill grates. The onion's juices will release and produce steam to remove the bits and charred-on debris.