Wirenet Image Band
wirenet.org mobile image band

WAI Forums


× Have a question on lubricants, wire drawing, quality, testing, ISO, environmental? Post your question here to get the answer!

Band Marking on insulation

7 years 8 months ago #1982 by Archived Forum Admin
We require to produce a Switch Board Cable with band markings on the insulation. The PVC insulation dia over 0.4mm conductor is about 0.8mm. The markings are in red & black colour in different patterns i.e. 1 mark, 2 mark, 3 mark, 4 mark & continuous marks at an interval of about 15-30mm.
Please suggest the suitable method / equipment for applying the band mark over insulation.



Please Log in to join the conversation.

7 years 8 months ago #1983 by Archived Forum Admin
Hello again Sheks,

a) Go to the Wire Association International Virtual Trade Show at www.wirenet.org/vts/vts_search.cfm

b) Select - Marking Machines - Plastic

c) Submit Query and browse

d) Look for Ring Markers on these web sites:
- Gem Gravure Company, Inc. (USA)
- Medek und Schoerner GmbH (Austria)

e) For solid striping, consider a dual crosshead, a second small vertical extruder and two different colors of plastic.

Best regards,
Peter J. Stewart-Hay
Stewart-Hay Associates

Please Log in to join the conversation.

Time to create page: 0.145 seconds


Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06433-2662

P: (203) 453-2777