Wirenet Image Band
wirenet.org mobile image band

WAI Forums

Joomla

× Have a question on lubricants, wire drawing, quality, testing, ISO, environmental? Post your question here to get the answer!

Carbide Wire Guide Rings

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
11 years 3 months ago #2004 by Archived Forum Admin
Carbide Wire Guide Rings was created by Archived Forum Admin
I'm looking for a source for carbide guide rings for a some custom wire payout equipment. The rings should be approx .375" ID and radiused all around to prevent gauling. I might be able to use ceramic as well. Can anyone help me source these?
-Chris

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
11 years 3 months ago #2005 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Carbide Wire Guide Rings
Hello again Chris,

For ceramic eyelets in North America contact:

CEMANCO LC
951 NW 31st Avenue
Pompano Beach, FL 33069
Telephone: 954 970 - 3099
Fax: 954 970 - 3056
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
www.cemanco.com/

Heany Industries Inc.
249 Briarwood Lane
Post Office Box 38
Scottsville, New York 14546
Phone 585-889-2700
Fax 585-889-2708
E-mail This email address is being protected from spambots. You need JavaScript enabled to view it.
www.heany.com/

For carbide, check:

Glen Carbide,Inc.
1054 Campbells Run Road
P.O. Box 498
Carnegie, PA 15106 USA
Phone 800-229-4536 / 412-279-7500
Fax 412-279-7503
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
glencarbide.com/

Likewise Kamatics Corporation in Connecticut used to sell carbide eyelets in various sizes.

Kamatics Corporation
P.O. Box 3
1330 Blue Hills Avenue
Bloomfield, CT 06002
Phone: (860) 243-9704
Fax: (860) 243-7993
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
www.kamatics.com/

I am confident that others will provide you with other sources of carbide and ceramic eyelets.

Sincerely,

Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
11 years 3 months ago #2006 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Carbide Wire Guide Rings
for carbide-try Federal Carbide in PA or Penn United in Tenn

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
11 years 3 months ago #2007 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Carbide Wire Guide Rings
FYI-
Found these Guide Rings now being made by Kennametal in B.C. in case anyone else needs them. These are the old Carballoy rings.
-c

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
11 years 3 months ago #2008 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Carbide Wire Guide Rings
Thanks for sharing the information Chris. We very much appreciate it.

Sincerely,

Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com

Please Log in to join the conversation.

Moderators: Erik A MacsPeter J Stewart-Hay
Time to create page: 0.076 seconds

Gallery

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06443-2662

P: (203) 453-2777