Wirenet Image Band
wirenet.org mobile image band

WAI Forums

Joomla

× Have a question on lubricants, wire drawing, quality, testing, ISO, environmental? Post your question here to get the answer!

Welder

More
5 years 5 months ago #2284 by Archived Forum Admin
Welder was created by Archived Forum Admin
I am looking for a suitable welder for `Stranded Copper Conductor' ranging from 0.3 Sq.mm to 16Sqmm. Please suggest an available model including Technical Data and suitability for using the welded conductor for manufacturing of Automotive Wires.

Please Log in to join the conversation.

More
5 years 5 months ago #2285 by Archived Forum Admin
Replied by Archived Forum Admin on topic Welder
Hello once more Shekhar,

AUGUST STRECKER GmbH & Co. KG in Germany is where you should be looking.
www.strecker-limburg.de/

I am confident you can figure the rest out by yourself.

Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com

Please Log in to join the conversation.

More
5 years 5 months ago #2286 by Archived Forum Admin
Replied by Archived Forum Admin on topic Welder
Thanks for the info. I had already sent an enquiry to Strecker, Germany. Is that the only source.

Sheks

Please Log in to join the conversation.

More
5 years 5 months ago #2287 by Archived Forum Admin
Replied by Archived Forum Admin on topic Welder
AUGUST STRECKER GmbH & Co. KG is by far the best in my experience. I am also aware that hydraulic cold welders have been used for large sizes but generally speaking, they are far too slow.

These welds are of course always cut out later in the process.

Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com

Please Log in to join the conversation.

More
5 years 5 months ago #2288 by Archived Forum Admin
Replied by Archived Forum Admin on topic Welder
"These welds are of course always cut out later in the process."
Does that statement of yours means that I can not use the welded strand in finished Insulated Automotive Wire.

Please Log in to join the conversation.

More
5 years 5 months ago #2289 by Archived Forum Admin
Replied by Archived Forum Admin on topic Welder
Shekhar,

Check your specifications for that answer.

Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com

Please Log in to join the conversation.

Time to create page: 0.330 seconds

Gallery

 

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06433-2662

P: (203) 453-2777