Wirenet Image Band
wirenet.org mobile image band

The Book of Terms

The Book of TermsThe WJI Book of Wire & Cable Terms: an interactive experience of learning and sharing
This book, written by industry volunteers and containing more than 5,000 entries, is an asset for newcomers to wire and cable.

At the same time, it also represents an opportunity for industry veterans to give back by either updating or adding to the more than 5,000 entries. This is an honor system process. Entries/updates must be non-commercial, and any deemed not to be so will be removed. Share your expertise as part of this legacy project to help those who will follow. Purchase a printed copy here.


 

All   0-9   A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Selenium

Element, chemical symbol Se. A gray metal chemically similar to tellurium. Excellent conductor of electricity. Obtained as a by-product of the electrolytic refining of copper. Used chiefly in photoelectric cells, rectifiers and other electronic devices, and as a pigment for glass and ceramics. Selenium is added to steel to enhance machinability. It combines with manganese sulfide inclusions to modify their shape to be more globular.

Selenium Cure

Process used to cure neoprene and rubber jacketed wires and cables. The process makes a dense, tough, durable jacket.

Self-Contained Cable

Compression cables in which a lead sheath is ex­truded over the diaphragm provided by the polythene or thin lead sheath covering each core. The pressurizing gas is contained between the outer casing and the impermeable diaphragm.

Self-Contained Pressure Cable

A pressure cable in which the container for the pressure medium is an impervious flexible metal sheath, reinforced if necessary, which is factory-assembled with the cable core.

Self-Extinguishing

The characteristics of a material whose flame is extinguished after the igniting flame is removed.

Self-Hardening Steel

See Air-Hardening Steel.

Self-Supporting Aerial Cable

A cable consisting of one or more insulated conductors with another independent length of material that supports the assemblage and which may or may not form a part of the electrical circuit.

Self-Supporting Cable

Any assemblage of conductors that incorporates a steel rope or steel sheath for added tensile strength, thus enabling it to be suspended between widely spaced supports.

Selvage Wire Rope

A rope in which the wires are arranged parallel to each other and sewn with yarn to keep them together and keep out moisture.

Semi-Closed Shape

Any shape that approaches a hollow section, but does not have a fully enclosed void.

Semi-Conducting Jacket

A jacket with a sufficiently low resistance so that its outer surface can be kept at substantially ground potential by a grounded conductor in contact with it at frequent intervals.

Semi-Conducting Polyethylene

A material used for power cable shields rated for a voltage of 5,000 volts or higher. The shielding (as screening) originally developed with fiber tapes impregnated with conducting carbon. This material has the ability to carry a high percentage of carbon loading and still remain extrudable. The contained carbon is the conducting medium.

Semi-Conducting Tape

Tape made of semi-conducting material such as nylon, conductive polyethylene and conductive polyvinyl chloride are wrapped around the insulation just beneath the braid to act as a clinging semi-conductive surface. This semi-­conductive surface will not rub against the insulation and thereby will not generate a static charge. The tape has such resistance that when applied between two elements of a cable, the adjacent surfaces of the two elements maintain substantially the same potential.

Semi-Conductor

A non-conductive material made slightly conductive by the addition of a specified sum of conductive material. In the wire industry, a material possessing electrical conductivity that falls somewhere between that of conductors and insulators. Usually made by adding carbon particles to an insulator (e.g., conductor shield and insulation shield).

Semi-Continuous Mills

This technology, which became outdated when continuous casting displaced ingot pouring, was a rolling mill function that compensated for the problem of a large billet forming a coil so quickly that the subsequent operations could not keep up with the mill’s output. Breakdown was accomplished on a three-high roughing mill followed by several paired straightaway stands next to a repeater and a finishing stand. This method had the advantage of reducing the stock section by free rolling in the three-high to a section suitable for continuous rolling at moderate finishing speeds.

Semi-Fabricated

Partially processed metals shapes (sheet, plate, bar, rod, wire, extrusions and foil in the case of aluminum).

Semi-Finished

First stage of metal shapes (ingots, blooms, billets or slabs) later to be rolled or forged into semi-fabricated and, then, finished products.

Semi-Hollow Shape

See Semi-Closed Shape.

Semi-Killed Steel

Steel partially deoxidized to permit evolution of sufficient carbon monoxide to offset solidification shrinkage.

Semi-Rigid

A cable containing a flexible inner core and a relatively inflexible sheathing material, such as a metallic tube, but which can be bent for coiling or spooling and placing in a duct or cable run.

Display # 

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06443-2662

P: (203) 453-2777